MAXIM INTEGRATED / ANALOG DEVICES MAX3080ESD+ Datasheet & Stock

The MAX3080ESD+ is a fail-safe, slew rate limited RS485/RS422 transceiver in 14 pin NSOIC package. The fail-safe circuitry in this device features a logic high receiver output when receiver inputs are open or shorted, it means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). This device has reduced slew rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables and allowing error free data transmission up to 115Kbps. It has a 1/8 unit load receiver input impedance that allows up to 256 transceivers on the bus.




Supply voltage range from 4.75V to 5.25V

Operating temperature range from -40°C to 85°C

Quiescent current is 375µA

Full duplex communication

Low power shutdown mode with 0.001µA supply current

Features receiver/driver enable function





Applications


Communications & Networking,

Industrial





Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.