FLUKE I410-KIT CAL DU Datasheet & Stock

The I410-KIT CAL DU from Fluke is an AC/DC current clamp and carry case kit. It is a special value kit for electrical professional to add on DC and AC current measurement capabilities to their DMM. I410 is a highly reliable AC/DC current clamp that measures 1A to 400A DC and provides accurate current reading without breaking the circuit. This clamp measures both AC and DC current with a large jaw, battery powered hall effect probe that gives access to difficult to reach areas. It includes a roomy carry case to hold and protect the meter and current clamp plus extra storage for test leads, probes and manuals.




Calibrated with data and uncertainties AC/DC current clamp

Nominal current range 400A AC/ DC & continuous current range from 1A to 400A AC, 1A to 400A DC

Maximum non-desctructive current is 400A, lowest measureable current is 0.5A

Basic accuracy is 3.5% + 0.5A (% reading + floorspec), useable frequency is DC to 3KHz

Output level is 1mV/A, zero error adjustment, accepts safety shrouded banana plugs

Working voltage is 600Vrms, CAT III

9V alkaline NEDA 1604 IEC 6F22 battery with 60hrs battery life

Maximum conductor diameter is 30mm, output cable length is 1.6m

Operating temperature range from -10°C to +50°C

I410 AC/DC current clamp size is 209mm x 78mm x 48mm and weight is 0.5Kg





Applications


Test & Measurement






Contents

I410 AC/DC current clamp, Zippered vinyl carry case with moveable divider.