FLUKE I310S CAL Datasheet & Stock

The I310S CAL from Fluke is an AC/DC current probe. The I310S current probe is based on hall effect technology for use in measurement of both DC and AC current. Using advanced hall effect technology, the clamp can accurately measure currents up to 450A peak over the frequency range of DC to 20KHz. These features make it a powerful tool for use in inverters, switch mode power supplies, industrial controllers, automotive diagnostics and other applications requiring current measurements and/or waveform analysis. The I310S may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.




Calibrated AC/DC current clamp

Current range from 30A and 300A AC RMS or ±45A and 450A DC

AC RMS or DC is ±45A and 450A, inrush current is 600A AC

Output sensitivity is 10mV/A (30A), 1mV/A (300A)

Accuracy is ±1% of reading ±50mA (30A range), ±1% of reading ±300mA (300A range)

Bandwidth to meet accuracy specification is 1KHz

Phase shift below 1KHz is less than 2 degrees, resolution is ±50mA (30A), ±100mA (300A)

9V alkaline, MN1604/PP3 30hrs, low battery indicator

Maximum conductor diameter is 19mm, output cable length is 2m, 4mm safety adapter

Operating temperature range from -10°C to +50°C & weight is 250g





Applications


Test & Measurement,

Industrial