ADAFRUIT 1752 Datasheet & Stock

Pump up the volume with this 20W stereo amplifier! This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Power it with 5-12VDC using the onboard DC power jack and plug stereo line level into the 3.5mm stereo headphone jack and jam out with ease. Since it's class D, its completely cool-running, no heat sinks are required and it's extremely efficient - up to 93% efficiency makes it great for portable or battery powered rigs. We like the MAX9744 amplifier at the heart of this board because its very easy to use, but it also has both analog and digital volume control capability. Use a single 1KO pot (we include one) to adjust volume analog-style. Or hook it up to your favorite microcontroller and send I2C commands to set 64-steps of volume amplification.




Power from 4.5V-14V DC voltage

Up to 93% efficient (88-93% typical)

20mA quiescent current (or put into shutdown for 1uA quiescent)

Up to 29.5dB max gain

Use DC or AC coupled line-level input, up to 3Vpp

Filterless Spread-Spectrum Modulation Lowers

Radiated RF Emissions from Speaker Cables

20W Stereo Output (4O, VDD = 12V, THD+N = 10%)

Low 0.04% THD+N

Integrated Click-and-Pop Suppression